home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
fax
/
src
/
etc
/
config.usr-courier-2.0
< prev
next >
Wrap
Text File
|
1994-08-01
|
2KB
|
50 lines
# $Header: /usr/people/sam/fax/etc/RCS/config.usr-courier-2.0,v 1.1 1994/02/18 17:19:45 sam Rel $
#
# Configuration for using the Class 2.0 command interface with
# a USR Courier v.32bis modem. The following firmware is know
# to work:
# Rev Date
# Supervisor 5.1 09/20/93
# DSP 11.1 09/16/93
#
# XON/XOFF flow control is used.
#
# CONFIG: CLASS2.0: USRobotics*
#
CountryCode: 1 # USA
LongDistancePrefix: 1
InternationalPrefix: 011
AreaCode: 415
DialStringRules: etc/dialrules
FAXNumber: +1.415.965.7824
ServerTracing: 1 # log server-related operations
SessionTracing: 1 # log server-related operations
RecvFileMode: 0600 # recvd facsimile are not public
LogFileMode: 0600 # private log files
DeviceMode: 0600 # device is accessible only to uucp/fax
#QualifyTSI: etc/tsi # accept facsimile from anyone
SpeakerVolume: off # machine's are already too loud
RingsBeforeAnswer: 1 # answer on first ring
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2.0 # use this to supply a hint
ModemRate: 19200 # max rate for DCE-DTE communication
ModemFlowControl: xonxoff # XON/XOFF flow control assumed
ModemSetupDTRCmd: S13=1&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: &C1 # setup so DCD reflects carrier (or not)
#
ModemFlowControlCmd: &H2 # set desired flow control method
#
ModemDialCmd: DT%s # T for tone dialing, @ for silence
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd: "M0 M1 M1 M1 M1"
#
ModemRecvFillOrder: MSB2LSB # bit order of received facsimile
ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
Class2BORCmd: BO=0 # bit order for phase B/C/D (direct)